Rossmax Fingertip Pulse Oximeter - LED Colour Display
Rossmax Fingertip Pulse Oximeter - LED Colour Display
Features
- Instant readings of SpO2 and pulse rate
- Shielded Design blocks Ambient Light
- Biocompatibility & Anti-Allergic Design
- Pulse Strength Indicator
- Visible & audible alarm
- Two way, two color OLED display
- Cord attached
- Batteries Included
- 2 Year Warranty
ARTG Registered
Specifications
- Measurement Range | SpO2: 35%~99% - PR: 30~250 bpm
- Precision | SpO2: 70%~99%; ±2%; 35%~69% (unspecified)
- Pulse rate | 30~250bpm; ±3
Couldn't load pickup availability
1. Open the clip; press the Power On/Off button. 2. Information of software version appears. Insert one finger (left hand middle finger is recommended), nail side up, into the finger opening of the pulse oximeter. Note: If no finger inserted, the device will auto shut off after 8 seconds. 3. Pulse oximeter begins its measurement. Note: Make sure the finger is lying flat. Do not shake and keep body steady during measurement. 4. Your SpO2 and pulse rate values will appear on the screen after few seconds. Note: 1. Don’t remove your finger until the measurement is completed. 2. While pulse strength is low, the reading will flicker. 5. Press button shortly to reverse the display upside down
1. Please clean the surface of the device before using medical alcohol (70% isopropyl alcohol) first, and then let it dry in air or clean it by dry clean fabric. When cleaning the device with water, the water temperature should be lower than 60°C 2. Using the medical alcohol to disinfect the product after use, prevent from cross infection for next time use. 3. The best storage environment of the device is - 25°C to 70°C ambient temperature and not higher than 90% relative humidity. Note: 1. Do not sterilize, autoclave or immerse this device in liquid. Do not pour or spray any liquids onto the device. 2. Do not use caustic or abrasive cleaning agents, or any cleaning agent containing ammonium chloride or isopropyl alcohol.
