Skip to product information
1 of 3

Rossmax Fingertip Pulse Oximeter with ACT

Rossmax Fingertip Pulse Oximeter with ACT

Regular price $145.95
Regular price Sale price $145.95
Sale Sold out
Tax included. Shipping calculated at checkout.
  • Artery Check Technology (ACT) embedded
  • Instant readings of SpO2, pulse rate and artery condition in 1 minute
  • Shielded Design blocks Ambient Light
  • Biocompatibility & Anti-Allergic Design
  • Pulse Strength Indicator
  • Visible & audible alarm
  • Two way, two color OLED display
  • Cord attached
  • Batteries Included
  • 2 Year Warranty

ARTG Registered


ACT (Artery Check Technology) analysis the pulse and SpO2 signals and determines the actually prevailing stiffness of the artery (Artery Condition). ACT further comprehensively classifies the arterial condition into 6 levels and presents the result by an intuitive graphical visualisation. Pulse rate, SpO2 and the artery condition are available at your fingertip!

The Fingertip Pulse Oximeter is an invaluable medical device that provides an accurate and non-invasive way to measure your heart rate and oxygen saturation levels. It is small, lightweight, and easy to use. With a Fingertip Pulse Oximeter, you can easily and quickly monitor their health and well-being from the comfort and convenience of you own home.

View full details

1. Open the clip; press the Power On/Off button. 2. Information of software version appears. Insert one finger (left hand middle finger is recommended), nail side up, into the finger opening of the pulse oximeter. Note: If no finger inserted, the device will auto shut off after 30 seconds. 3. Pulse oximeter begins its measurement. Note: Make sure the finger is lying flat. Do not shake and keep body steady during measurement. 4. Your SpO2 and pulse rate values will appear on the screen after few seconds and artery check result will appear on screen after 30 - 60 seconds. 5. Remove the finger, the screen will show artery check level.

1. Please clean the surface of the device before using medical alcohol (70% isopropyl alcohol) first, and then let it dry in air or clean it by dry clean fabric. When cleaning the device with water, the water temperature should be lower than 60°C. 2. Using the medical alcohol to disinfect the product after use, prevent from cross infection for next time use. 3. The best storage environment of the device is - 25°C to 70°C ambient temperature and not higher than 90% relative humidity. Note: 1. Do not sterilize, autoclave or immerse this device in liquid. Do not pour or spray any liquids onto the device. 2. Do not use caustic or abrasive cleaning agents, or any cleaning agent containing ammonium chloride or isopropyl alcohol.