Rossmax Infrared Non-Contact Temple Thermometer
Rossmax Infrared Non-Contact Temple Thermometer
Features
- Measurement distance within 5cm (2 inch)
- 1 second measurement
- Temple temperature
- Object temperature
- Fever alarm
- Up to 9 memories
- Backlight
- Auto shut-off
- °C / °F switchable
- Self-diagnosis for malfunction
- Storage case included
- Low battery indicator
- Batteries Included
- 5 Year Warranty
ARTG Registered
Download the Instruction Manual
Advanced Infrared measuring system
For non-contact temperature measurement - The advanced infrared temperature measuring technology provides safe, accurate, reliable and hygienic readings for measuring both temple and object temperature. The temple temperature reading lookup table was calculated and developed based on systematic skin clinical data statistics to accommodate fever and non-fever subjects, under different operating environment. The one second measurement thermometer without contacting skin is a suitable choice for obtaining body temperature and prevents cross contamination by measuring around 5 cm from the temple.
Clinically Accurate
This Temple thermometer has been clinically tested in several big teaching hospitals based on the protocol of ASTM E1965-98:2009 regulatory standard, covering sufficient febrile and normal body temperature subjects with satisfied clinical repeatability and measuring accuracy comparing to the concurrent oral temperature measurement reading.
Couldn't load pickup availability
Please refer the Instruction manual for clear instructions
1. The probe is the most delicate part of the thermometer. Use with care when cleaning the lens to avoid damage. 2. After the measurement, please use the cotton swab with the Alcohol (70% concentration) to clean the inside of the probe, including lens and metal parts. 3. Allow the probe to fully dry for at least 5 minutes. 4. Storage temperature range: It should be stored at room temperature between -25~+55°C, (-13°F~131°F) RH<=95% 5. Keep the unit dry and away from any liquids and direct sunlight. 6. The probe should not be submerged into liquids. 7. Please check the device if damaged once it falls. If you can’t make sure of it, please send the complete device to the nearest retailer for re-calibration. 8. Holding the thermometer too long may cause a higher ambient temperature reading of the probe. This could make the body temperature measurement lower than usual. Please try not to touch the thermometer probe part for avoiding the incorrect reading.
