Rossmax Fingertip Pulse Oximeter with ACT & Bluetooth
Rossmax Fingertip Pulse Oximeter with ACT & Bluetooth
This Pulse Oximeter is used to measure arterial oxygen saturation (% SpO2) of haemoglobin and pulse rate, an important indicator of your respiratory function. It is non-invasive device intended for spot-checking oxygen saturation in adults and children over 3 years of age at home, hospital and clinics.
Features
- Healthstyle App
- Bluetooth® low energy technology
- Artery Check Technology (ACT) embedded
- One minute reading for SpO₂, pulse rate & artery condition
- Pulse strength indicator
- Shielded design blocks ambient light
- Two colour OLED display
- BLE 4.0 data transfer real-time
- Batteries Included
- 2 Year Warranty
ARTG Registered
ACT (Artery Check Technology) analyses the pulse and SpO2 signals to determine the prevailing stiffness of the artery (Artery Condition). ACT further comprehensively classifies the arterial condition into 6 levels and presents the result with a live graph. Pulse rate, SpO2 and the artery condition are available at your fingertip!
The Fingertip Pulse Oximeter is an invaluable medical device that provides an accurate and non-invasive way to measure your heart rate and oxygen saturation levels. It is small, lightweight, and easy to use. With a Fingertip Pulse Oximeter, you can easily and quickly monitor their health and well-being from the comfort and convenience of you own home.
Couldn't load pickup availability
1. Open the clip; press the Power On button. 2. Insert one finger, nail side up, into the finger opening of the pulse oximeter. Note: if no finger inserted, the device will auto shut off after 8 seconds. 3. Pulse oximeter begins its measurement. Note: make sure the finger is lying flat, Do not shake and keep body steady during measurement. 4. Your SpO2 and pulse rate values will appear on the screen after few seconds. Note: 1. Don’t remove your finger until the measurement is completed. 2. If SpO2 and pulse rate cannot be detected, a symbol will appear on the screen. 3. While pulse strength is low, the reading will flicker
Cleaning 1. Please clean the surface of the device before using. Wipe the device with medical alcohol (70% isopropyl alcohol) first, and then let it dry in air or clean it by dry clean fabric. When cleaning the device with water, the water temperature should be lower than 60°C 2. Using the medical alcohol to disinfect the product after use, prevent from cross infection for next time use. 3. The best storage environment of the device is - 25°C to 70°C ambient temperature and not higher than 90% relative humidity. Note: 1. Do not sterilize, autoclave or immerse this device in liquid. Do not pour or spray any liquids onto the device. 2. Do not use caustic or abrasive cleaning agents, or any cleaning agent containing ammonium chloride or isopropyl alcohol. Maintenance Recommend user to return this device to the manufacturer perform the necessary checks every 24 months.
